Aracheon
04-01-2008, 01:51 AM
Obviously removed from my 2001 F4i, it'll fit all F4is from 01 to 07. (This may very well fit other Hondas as well...) and if you're looking to go the custom route on something else, you can always clip the plugs and wire them in directly. Basically what's in this big ugly mess of wires is the stock 3-wire setup designed for a dual-filament bulb, that winds down to a 2-wire setup for LED flushmounts.
Now, one of the modifications I did to the F4i because the flushmounts I chose to use were not visible from the front, was to wire a set of blinkers inside of the air intake vents that faced forward. In the pictures, you'll see two sets of wires coming out - one for the flushmount, and one for the blinker.
This is obviously not the prettiest wiring job I've ever done, and was hid quite nicely inside my front cowl. The wires can obviously be modified or shortened or removed to fit your current setup.
Long story short... if you don't like soldering, this is the cheap and easy way to get LED flushmounts to act as running lights as well as blinkers. (I'm willing to help with cleaning up the wiring, installation on your bike, or walking you through the process if you need help.)
$10.
http://i81.photobucket.com/albums/j208/aracheon/Shit%20fo%20sale/DSC01959.jpg
http://i81.photobucket.com/albums/j208/aracheon/Shit%20fo%20sale/DSC01960.jpg
http://i81.photobucket.com/albums/j208/aracheon/Shit%20fo%20sale/DSC01961.jpg
Now, one of the modifications I did to the F4i because the flushmounts I chose to use were not visible from the front, was to wire a set of blinkers inside of the air intake vents that faced forward. In the pictures, you'll see two sets of wires coming out - one for the flushmount, and one for the blinker.
This is obviously not the prettiest wiring job I've ever done, and was hid quite nicely inside my front cowl. The wires can obviously be modified or shortened or removed to fit your current setup.
Long story short... if you don't like soldering, this is the cheap and easy way to get LED flushmounts to act as running lights as well as blinkers. (I'm willing to help with cleaning up the wiring, installation on your bike, or walking you through the process if you need help.)
$10.
http://i81.photobucket.com/albums/j208/aracheon/Shit%20fo%20sale/DSC01959.jpg
http://i81.photobucket.com/albums/j208/aracheon/Shit%20fo%20sale/DSC01960.jpg
http://i81.photobucket.com/albums/j208/aracheon/Shit%20fo%20sale/DSC01961.jpg